Switch 7700 Command reference Guide, v2.0

SNMP Configuration Commands 473
Description
Using the display snmp-agent usm-user command, you can display information
of all the SNMP usernames in the group username list.
Example
Display the information of all the current users.
<SW7700>display snmp-agent usm-user
User name: authuser
Engine ID: 00000009020000000C025808
storage-type: nonvolatile
The following table describes the output fields.
snmp-agent
local-engineid
Syntax
snmp-agent local-engineid engineid
undo snmp-agent local-engineid engineid
View
System view
Parameter
local-engineid: Specify an engineID for the local SNMPv3 entity
engineid: Specify the engine ID with a character string, only composed of
hexadecimal numbers between 5 and 32 including; The default value is
"Enterprise Number + device information".
Description
Using the snmp-agent local-engineid command, you can configure a name for
a local or remote SNMP engine on the Ethernet Switch. Using the
undo snmp-agent local-engineid command, you can restore the default setting
of engine ID.
Device information is determined according to different products. It can be IP
address, MAC address or user defined text. However, you must use numbers in
hexadecimal form.
Example
Configure the ID of a local or remote device as 12345.
<SW7700>display snmp-agent local-engineid
Table 38 Output description of the display snmp-agent usm-user command
Field Description
User name Name of SNMP user
Engine ID Character string identifying SNMP device
storage-type Storage type