Switch 7700 Command reference Guide, v2.0

SNMP Configuration Commands 477
snmp-agent sys-info Syntax
snmp-agent sys-info { contact sysContact | location sysLocation |
version { { v1 | v2c | v3 } * | all } }
undo snmp-agent sys-info { contact | location | version { { v1 | v2c
| v3 } * | all } }
View
System view
Parameter
sysContact: Specify a character string describing the system maintaining contact
(in bytes), with a length ranging from 1 to 255; The default contact information is
"3Com Marlborough USA".
sysLocation: Specify a character string to describe the system location; By
default, the character string is "Marlborough USA".
version: version of running SNMP.
v1: SNMP V1.
v2c: SNMP V2C.
v3: SNMP V3.
all: all SNMP version (includsSNMP V1, SNMP V2C, SNMP V3).
Description
Using the snmp-agent sys-info command, you can set system information such
as geographical location of the device, contact information for system
maintenance and version information of running SNMP. Using the
undo
snmp-agent sys-info location
command, you can restore the default value.
Example
Set system location as Building 3/Room 214.
[SW7700]snmp-agent sys-info location Building 3/Room 214
snmp-agent target-host Syntax
snmp-agent target-host trap address udp-domain host_address [
udp-port udp_port_number ] params securityname community_string [ v1
| v2c | v3 [ authentication | privacy ] ]
undo snmp-agent target-host host_address securityname
community-string
View
System view
Parameter
trap: Specifies the host to receive traps or notifications