Switch 7700 Command reference Guide, v2.0

66 CHAPTER 3: USING VLAN COMMANDS
Description
Use the display vlan command to view related information about specific
VLANs, specific types of VLAN or all VLANs. The information includes: VLAN type,
whether the Route interface has been configured on the VLAN, the Broadcast
Suppression max-ratio, the VLAN description, and a list of the tagged and
untagged ports that belong to the VLAN.
■ Use the command display vlan to display a summary of the VLAN IDs of all
VLANs configured on the system.
■ Use the command display vlan vlan_id to display information on a specific
VLAN.
■ Use the command display vlan all to display information on all the VLANs.
■ Use the command display vlan dynamic to display information on VLANs
created dynamically by the system.
■ Use the command display vlan static to display information of VLAN
created statically by the system.
Related command: vlan.
Examples
To display a summary of the VLAN IDs of all VLANs configured on the system,
enter the following:
[SW7700]display vlan
The information displays in the following format:
The following vlan exist(s):
1 (default), 2, 3
To display information on VLAN2, enter the following:
[SW7700]display vlan 2
The information displays in the following format:
Vlan ID: 2
Vlan Type: static
Route interface: not configured
Broadcast Max-ratio: 100%
Description: 3COM
Tagged Ports: none
Untagged Ports:
Ethernet1/0/1 Ethernet1/0/5 Ethernet1/0/7
interface VLAN-interface Syntax
interface Vlan-interface vlan_id
undo interface Vlan-interface vlan_id
View
System view