Switch 7700 Command reference Guide, v2.0

GVRP Configuration Commands 75
You can use the interface_name at this command. This is made up of
interface_type and interface_number parameters combined as a single
parameter, for example Ethernet0/0/1.
to interface_type interface_number If you want to display statistics on a range
of ports, use this parameter to indicate the last port in the range. This parameter is
optional.
You can enter up to ten interface_type and interface_number parameters at
one display gvrp statistics command.
Description
Using the display gvrp statistics command, you can display GVRP statistics
information on a specified port, and range of ports or all ports.
■ Use the display gvrp statistics interface_type interface_number
command to display information on a specific port.
■ Use the display gvrp statistics interface_type interface_number to
interface_type interface_number
command to display information on a
range of ports.
■ Use the display gvrp statistics command to display information on all
ports.
This command displays the GVRP status, failed GVRP registration entries, last
GVRP data unit origin and the GVRP registration type.
Example
To display the GVRP statistics information on Ethernet port 1/0/3, enter the
following:
<SW7700>display gvrp statistics interface ethernet 1/0/3
The information displays in the following format:
GVRP statistics on port Ethernet1/0/3
GVRP Status : Enabled
GVRP Failed Registrations : 0
GVRP Last Pdu Origin : 0000-0000-0000
GVRP Registration Type : Normal
display gvrp status Syntax
display gvrp status
View
All views
Parameter
None
Description
Using the display gvrp status command, you can check the status of GVRP.