Switch 7700 Command reference Guide, v2.0

IP Performance Configuration Commands 93
The information displays in the following format:
IP Protocol:
Sent packets:
sent out: 67, forwarded: 0, raw packets: 0
discarded: 0, routing failed: 98
Received packets:
total:782477, local host: 6500, format error: 0
checksum error:0, option error: 0, protocol error: 18
discarded for TTL exceeded: 0
Fragmented packets:
total: 0, fragmented: 0, reassembled: 0
timeout: 0, error: 0, failed: 0
sent: 0
ICMP protocol:
Sent packets:
redirected: 0, unreached: 67, echoed: 0
echo replied: 0, mask requested: 0, mask replied: 0
src quenched: 0, parameter req: 0, timestamp req: 0
time exceeded: 0, TTL exceeded: 0
Received packets:
format error: 0, checksum error: 0, redirected: 0
unreached: 0, echoed: 0, echo replied: 0
mask req: 0, mask replied: 0, src quenched: 0
parameter req: 0, timestamp req: 0
time exceeded: 0, TTL exceeded: 0
display tcp statistics Syntax
display tcp statistics
View
All views.
Parameter
None.
Description
Use the display tcp statistics command to view statistics information on
TCP packets.
The statistics information is divided into two major categories: Received packets
and Sent packets. These two categories are then divided into further types of
information, for example window probe packets, window update packets,
duplicate packets and out-of-order packets.
Related commands: display tcp status, reset tcp statistics
To view information on TCP packets, enter the following:
[SW7700]display tcp statistics