HP 3100 SI Switch Series - S3100SI-CMW310-R2215P12 Release Notes

The user’s MAC was not deleted from Port A.
• Condition:
Configure Dot1x port-method to ‘macbased’ on port A and Dot1x port-method to ‘portbased’ on port B.
The user who has been online on port A moved to port B and passed the authentication.
LSOD10405
• Symptom:
The host should not receive multicast flow for multicast group 225.X.X.X, but it receives.
• Condition:
The port A is configured igmp-snooping group-policy which denies multicast group 225.X.X.X. Port A
receives IGMP report packet for multicast group 225.X.X.X.
Resolved Problems in CMW310-R2214P03
LSOD10314
• Symptom:
The dot1x authentication failed.
• Condition:
Configure dot1x function, and the dot1x authentication-method is EAP. In one second, The dot1x client
sends two EAPOL-start packets in one second to trigger an authentication.
LSOD10384
• Symptom:
The device reboots abnormally.
• Condition:
Enabled dot1x and DHCP snooping on device, user log in success and get IP address success and add
DHCP snooping item success. Then user log out.
Resolved Problems in CMW310-R2213P03
LSOD10211
• Symptom:
Can not choose a port of specified VLAN to add MAC address.
• Condition:
Configure the device through Web. Select ‘Port > MAC Address [Add]’ from the navigation tree to add
MAC address to a port of specified VLAN.
LSOD10062
• Symptom:
The Memory leaks 192 bytes.
• Condition:
12