HP 3100 SI Switch Series - S3100SI-CMW310-R2215P12 Release Notes

2. Select application file to boot

3. Display all files in flash

4. Delete file from flash

5. Modify bootrom password

6. Enter bootrom upgrade menu

7. Skip current configuration file

8. Set bootrom password recovery

9. Set switch startup mode

0. Reboot

Enter your choice(0-9):

Software Upgrading via Console Port (Xmodem

Protocol)

1. Step 1: Enter 6 in the Boot menu. Press <Enter> and the system will access the download program

menu.

Bootrom update menu:

1. Set TFTP protocol parameter

2. Set FTP protocol parameter

3. Set XMODEM protocol parameter

0. Return to boot menu

Enter your choice(0-3):

2. Step 2: Enter 3 in the download program menu. Select to implement the software upgrading via

Xmodem protocol. Press <Enter> and the screen will display the following information:

Please select your download baud rate:

1. 9600

2. 19200

3. 38400

4. 57600

5. 115200

6. Exit

Enter your choice (0-5):

3. Step 3: Select the appropriate download speed based on the actual requirements. For example,

enter 5 to select the download speed as 115200bps. Press <Enter> and the system will display the

following information:

Download baudrate is 115200 bps. Please change the terminal's baudrate to 115200 bps, and

select XMODEM protocol.

Press ENTER key when ready.

4. Step 4: Follow the above prompt and change the baud rate on the console terminal, so that the

baud rate is consistent with the selected download baud rate of the software. After the baud rate

setting at the console terminal is completed, disconnect the terminal and reconnect it. Press

<Enter> to start downloading, and the screen will display the following information: