HP 3100 SI Switch Series - S3100SI-CMW310-R2215P12 Release Notes

Are you sure to download file to flash? Yes or No(Y/N)
7. Step 7: Enter Y and the system starts downloading the file. Enter N and the system will return to
Boot menu. Take entering Y as an example. Enter Y and press <Enter>, the system begins
downloading programs. After the downloading is completed, the system starts write-flash
operation. Upon completion of this operation, the screen displays the following information to
indicate that the downloading is completed:
Loading ........................................................done!
Writing to flash................................................done!
Software Upgrading via FTP
3. Introduction to FTP
Through the Ethernet port, the S5600 can serve as an FTP server or client. It provides another means to
download the system program and configure the files. In the following description we assume that the
S5600 serves as an FTP client.
4. FTP upgrading procedure
1. Step 1: Select an Ethernet interface for downloading on the S5600. Connect the switch to the PC
(where the upgrading file is located and whose IP address should be known) via the interface. At
the same time, you should connect the switch to a PC via the Console port (the PC should be the
same as the PC where the upgrading file is located).
2. Step 2: Run the FTP server program on the PC connected to the Ethernet interface for upgrading,
and specify the file path of the upgrading program.
3. Step 3: Run the terminal emulation program on the PC connected to the Console port, and boot the
switch to access the Boot menu.
4. Step 4: Enter 1 in the Boot menu. Press <Enter> and the system will access the download program
menu.
Please set application file download protocol parameter:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3):2
5. Step 5: Enter 2 in the download program menu. Select FTP for the software upgrading. Press
<Enter> and the screen will display the following information:
Please modify your FTP protocol parameter:
Load File name
Switch IP address
Server IP address
FTP User Name
FTP User Password
6. Step 6: Complete the relevant information based on the actual requirements and press <Enter>.
The screen will display the following information:
Are you sure to download file to flash? Yes or No(Y/N):
25