Switch 7700 Configuration Guide

GMRP 115
By default, GMRP is disabled.
Enabling/Disabling GMRP on the Port
Perform the following configuration in Ethernet port view.
GMRP should be enabled globally before being enabled on a port.
By default, GMRP is disabled on the port.
Displaying and
Debugging GMRP
After the previous configuration, execute the display command to display the
GMRP configuration, and to verify the effect of the configuration.
Execute the debugging command in user view to debug GMRP configuration.
Example: Configuring
GMRP
Implement dynamic registration and update of multicast information between
switches.
Figure 3 GMRP Networking
Configure LS_A:
1 Enable GMRP globally.
[SW7700] gmrp
2 Enable GMRP on the port.
[SW7700] interface Ethernet 1/0/1
[SW7700-Ethernet1/0/1] gmrp
Configure LS_B:
1 Enable GMRP globally.
[SW7700] gmrp
2 Enable GMRP on the port.
[SW7700] interface Ethernet 1/0/1
Tabl e 4 Enabling/Disabling GMRP on the Port
Operation Command
Enable GMRP on the port gmrp
Disable GMRP on the port undo gmrp
Tabl e 5 Display and Debug GMRP
Operation Command
Display GMRP statistics. display gmrp statistics [ interface interface_list ]
Display GMRP global status. display gmrp status
Enable GMRP debugging debugging gmrp event
Disable GMRP debugging undo debugging gmrp event
Switch A Switch B
E0/1
E0/1