Switch 7700 Configuration Guide

QoS Overview 153
For more information about the commands, refer to the “3Com Command
Reference Guide”.
Configure Traffic Statistics
The traffic statistics function counts the transmitted data that matches the ACL
rules. After the traffic statistics function is configured, you can use the display
qos-info traffic-statistic command to display the statistics information.
Perform the following configuration in Ethernet port view.
For details about the command, refer to the “3Com Command Reference Guide”.
Display and Debug QoS After you configure QoS, execute the display command in all views to display the
running of the QoS configuration, and to verify the effect of the configuration.
Execute the reset command in user view to clear the statistics of the QoS module.
Cancel the configuration of
bandwidth assurance.
undo traffic-bandwidth outbound { ip-group { acl-number
| acl-name } [ rule rule ] | link-group { acl-number | acl-name }
[ rule rule ] }
Tabl e 16 Configure Traffic Statistics
Operation Command
Configure traffic statistics traffic-statistic { inbound | outbound } { ip-group {
acl-number | acl-name } [ rule rule ] | link-group {
acl-number | acl-name } [ rule rule ] }
Cancel the configuration of traffic
statistics
undo traffic-statistic { inbound | outbound } {
ip-group { acl-number | acl-name } [ rule rule ] |
link-group { acl-number | acl-name } [ rule rule ] }
Display the statistics information display qos-info traffic-statistic
Table 15 Configure Bandwidth Assurance
Operation Command
Tabl e 17 Display and Debug QoS
Operation Command
Display the parameter settings of
all the QoS actions
display qos-interface [ interface-name | interface-type
interface-num ] all
Display the queue scheduling mode
and parameter
display qos-interface [ interface-name | interface-type
interface-num ] queue-scheduler
Display the parameter settings of
rate limit
display qos-interface [ interface-name | interface-type
interface-num ] traffic-limit
Display the settings of priority tag display qos-interface [ interface-name | interface-type
interface-num ] traffic-priority
Display the information about the
traffic
display qos-interface [ interface-name | interface-type
interface-num ] traffic-statistic
Display the information about the
bandwidth assurance
display qos-interface [ interface-name | interface-type
interface-num ] traffic-bandwidth
Display the information about the
RED operation
display qos-interface [ interface-name | interface-type
interface-num ] traffic-red
Display the settings of priority used
for putting the packet to the
sending queue
display priority-trust