Switch 7700 Configuration Guide

Setting Terminal Parameters 15
Configure idle-timeout By default, idle-timeout is enabled and set to 10
minutes on all the user interfaces. The idle-timeout command is described in
Table 5.
Lock user interface This command locks the current user interface and
prompts the user to enter a password. This makes it impossible for others to
operate in the interface after the user leaves. The lock command is described in
Table 6.
Set the screen length If a command displays more than one screen of
information, you can use the screen length command to determine how many
lines are displayed on a screen so that information can be separated in different
screens and you can view it more conveniently. The screen-length command is
described in
Table 7.
By default, the terminal screen length is 24 lines.
Set the History Command Buffer SIze Ta b l e 8 describes the
history-command max-size command. By default, the size of the history
command buffer is 10.
Manage Users
The management of users includes the setting of the user logon authentication
method, the level of command a user can use after logging on, the level of
command a user can use after logging on from the specifically user interface, and
command level.
Tabl e 5 Idle Timeout
Operation Command
Configure idle-timeout idle-timeout minutes [ seconds ] (idle-timeout 0 means
disabling idle-timeout.)
Restore the default idle-timeout undo idle-timeout
Tabl e 6 Lock User Interface
Operation Command
Lock user interface lock
Tabl e 7 Setting Screen Length
Operation Command
Set the screen length screen-length screen-length (screen-length 0 indicates to
disable screen display separation function.)
Restore the default screen
length
undo screen-length
Tabl e 8 Set the History Command Buffer Size
Operation Command
Set the history command
buffer size
history-command max-size value
Restore the default history
command buffer size
undo history-command max-size