Switch 7700 Configuration Guide

RMON 29
defined in event management. The alarm management includes browsing, adding
and deleting alarm entries.
You can use the following commands to add/delete an entry to/from the alarm
table.
Perform the following configuration in system view.
Add/Delete an Entry to/from the Event Table
RMON event management defines the event ID and handling of the event by
keeping logs, sending Trap messages to NMS or performing both at the same
time.
You can use the following commands to add/delete an entry to/from the event
table.
Perform the following configuration in system view.
Add/Delete an Entry to/from the History Control Table
The history data management helps you set the history data collection, periodical
data collection and storage of the specified ports. The sampling information
includes the utilization ratio, error counts and total number of packets.
You can use the following commands to add/delete an entry to/from the history
control table.
Perform the following configuration in Ethernet port view.
Tabl e 53 Add/Delete an Entry to/from the Alarm Table
Operation Command
Add an entry to the alarm table. rmon alarm entry-number alarm-variable sampling-time
{ delta | absolute } rising-threshold threshold-value1
event-entry1 falling-threshold threshold-value2
event-entry2 [ owner text ]
Delete an entry from the alarm
table.
undo rmon alarm entry-number
Tabl e 54 Add/Delete an Entry to/from the Event Table
Operation Command
Add an entry to the event table. rmon event event-entry [ description string ] { log |
trap trap-community | log-trap log-trapcommunity |
none } [ owner rmon-station ]
Delete an entry from the event
table.
undo rmon event event-entry
Tabl e 55 Add/Delete an Entry to/from the History Control Table
Operation Command
Add an entry to the history control
table.
rmon history entry-number buckets number interval
sampling-interval [ owner text-string ]
Delete an entry from the history
control table.
undo rmon history entry-number