Switch 7700 Configuration Guide

22 CHAPTER 1: SYSTEM ACCESS
Figure 14 Relation Diagram of the Views
The Table 18 describes the function features of different views and the commands
to enter or quit.
Tab le 18 Function Feature of Command View
Command
view
Function Prompt
Command to
enter
Command to
exit
User view Show the basic
information about
operation and
statistics
<SW7700> Enter right after
connecting the
switch
quit
disconnects to
the switch.
System view Configure system
parameters
[SW7700] Key in
system-view in
user view
quit or return
returns to user
view
Ethernet Port
view
Configure
Ethernet port
parameters
[SW7700-Ether
net1/0/1]
100M Ethernet port view
Key in interface ethernet 1/0/1 in
system view
[SW7700-Gigabit
Ethernet1/0/1]
GigabitEthernet port view
Key in interface gigabitethernet
1/0/1
in system view
VLAN view Configure VLAN
parameters
[SW7700-Vlan1] Key in vlan 1 in
System view
quit returns to
System view
return returns
to user view
Ethernet port view
User interface viiew
VLAN view
VLAN interface view
User view
System
view
RIP view
OSPF view
Route policy view
OSPF area view
Basic ACL view
Advanced ACL view
Interface-based ACL view
Layer-2 ACL view
FTP client view
Local-user view
PIM view
RADIUS server group view