Switch 7700 Configuration Guide

24 CHAPTER 1: SYSTEM ACCESS
Feature and Functions of
the Command Line
Online Help
The command line interface provides full and partial online Help modes.
You can get the help information through these online help commands, which are
described as follows.
■ Enter ? in any view to get all the commands in it and corresponding
descriptions.
<SW7700> ?
User view commands:
language-mode Specify the language environment
ping Ping function
quit Exit from current command view
super Enter the command workspace with specified user priority
level
telnetEstablish one TELNET connection
tracertTrace route function
■ Enter a command with a ?, separated by a space. If this position is for
keywords, then all the keywords and the corresponding brief descriptions will
be listed.
<SW7700> ping ?
-a Select source IP address
-c Specify the number of echo requests to send
-d Specify the SO_DEBUG option on the socket being used
-h Specify TTL value for echo requests to be sent
-I Select the interface sending packets
-n Numeric output only. No attempt will be made to lookup host
addresses for symbolic names
-p No more than 8 "pad" hexadecimal characters to fill out the sent
packet. For example, -p f2 will fill the sent packet with f and 2
repeatedly
-q Quiet output. Nothing is displayed except the summary lines at
startup time and when finished
-r Record route. Includes the RECORD_ROUTE option in the ECHO_REQUEST
packet and displays the route
-s Specifies the number of data bytes to be sent
-t Timeout in milliseconds to wait for each reply
Layer-2 ACL
view
Define the rule of
layer-2 ACL
[SW7700-acl-
link-200]
Key in acl
number 200 in
System view
quit returns to
System view
return returns
to user view
RADIUS
server group
view
Configure radius
parameters
[SW7700-radius-
1]
Key in radius
scheme 1 in
System view
quit returns to
System view
return returns
to user view
ISP domain
view
Configure ISP
domain
parameters
[SW7700-isp-163
.net]
Key in domain
isp-163.net in
System view
quit returns to
System view
return returns
to user view
Table 18 Function Feature of Command View
Command
view
Function Prompt
Command to
enter
Command to
exit