Switch 7700 Installation Guide

56 CHAPTER 4: MAINTAINING SOFTWARE
RAM Line....OK
System is booting................
* *
• SW 7700 BOOTROM, Version 4.00 *
* *
Copyright© 2001-2005 by 3Com Corporation, Inc.
Creation date : May 26 2002, 10:23:31
CPU type : MPC8260
CPU Clock Speed : 200MHz
BUS Clock Speed : 66MHz
Memory Size : 128MB
SW 7700 main board self testing...............................
60X_SDRAM Data lines Selftest.............................OK!
60X_SDRAM Address lines Selftest..........................OK!
60X_SDRAM fast selftest...................................OK!
LOCAL_SDRAM Data lines Selftest...........................OK!
LOCAL_SDRAM Address lines Selftest........................OK!
LOCAL_SDRAM fast selftest.................................OK!
Please check leds................ .....Led selftest finished!
Switch chip selftest......................................OK!
CPLD selftest.............................................OK!
Press Ctrl+B to enter Boot Menu...
The contents displayed on the terminal can vary with different versions of Boot
ROM.
If you press Ctrl+B immediately, the system displays the Boot Menu. If you do not
press Ctrl+B, the system initiates the program decompression process. At this time
if you want to access the BOOT Menu, you must reboot the switch.
Press Ctrl+B. The system displays:
Initialize flash file system. Please wait!
Password :
Enter the BootROM password. After entering the correct password (no password
is set for the switch by default), the system will access the BOOT Menu:
Boot Menu
1: Download application file to flash
2: Select application file to boot
3: Display all files in flash
4: Delete file from flash
5: Modify bootrom password
0: Reboot
Enter your choice(0-5):
CAUTION: While using the switch, please keep in mind the modified BOOTROM
password.