Version 6 SuperStack 3 Switch 4400 Management Interface Reference Guide

Table Of Contents
Command Line Interface - security device user create
http://support.3com.com/infodeli/tools/switches/4400/DHA1720-3AAA08/htmcli/securitydeviceusercreate.htm[11/15/2010 3:46:14 PM]
Enter SNMPv3 authentication protocol (none,md5,sha)[md5]:
8. Enter the SNMPv3 authentication protocol you wish to use.
If you enter 'none' no further prompts will appear.
If you enter 'md5 or sha' the following prompt is displayed:
Enter SNMPv3 authentication password:
9. Enter your SNMPv3 authentication password.
The following prompt is displayed:
Enter SNMPv3 privacy protocol (none,des)[none]:
10. Enter the SNMPv3 privacy protocol you wish to use.
If you enter 'none' no further prompts will appear.
If you enter 'des' the following prompt is displayed:
Enter SNMPv3 privacy password:
11. Enter your SNMPv3 privacy password.
Related Commands
delete Deleting User Details
modify Modifying User Details
pwdRecover Enabling/Disabling Password Recovery
summary Displaying User Details