Version 6 SuperStack 3 Switch 4400 Management Interface Reference Guide

Command Line Interface - security device authentication summary
http://support.3com.com/infodeli/tools/switches/4400/DHA1720-3AAA08/htmcli/securitydeviceauthenticationsummary.htm[11/15/2010 3:46:52 PM]
Command Line Interface
security device authentication summary
Displaying the Current Setting of the Device Authentication Mode
You can display the current setting of the device authentication mode for the Switch
using the summary command on the Authentication menu. This command will also display
the RADIUS client settings, if applicable.
This command is not available on the SuperStack 3 Switch 4400 SE. To make
RADIUS authentication of Switch Management Login available on the SuperStack 3
Switch 4400 SE, upgrade the product to the Switch 4400 SE Enhanced Software
Upgrade (3C17207).
To display the current setting of the device authentication for the Switch:
From the Top-level menu, enter:
security device authentication summary
A summary of the current setting for the Switch is displayed as shown in the
example below.
Authentication mode: RADIUS
Primary RADIUS authentication server IP address: 123.45.678.90
Primary RADIUS authentication UDP port number: 1812
Secondary RADIUS authentication server IP address: 123.45.678.99
Secondary RADIUS authentication UDP port number: 1811
Maximum attempts: 4
Timeout (seconds): 2
Related Commands
logins Displaying Authentication Login Attempts
statistics Displaying Authentication Summary Information
systemMode Modifying Authentication Mode
setup Using the RADIUS Configuration Wizard
accounting display Displaying RADIUS Accounting Statistics
accounting modify Modifying RADIUS Accounting Configuration
authentication display Displaying RADIUS Authentication Statistics
authentication modify Modifying RADIUS Authentication Configuration
retries Modifying RADIUS Retry Parameters
sharedSecret Modifying RADIUS Security Key
radius summary Displaying RADIUS Summary Information