Version 6 SuperStack 3 Switch 4400 Management Interface Reference Guide

Command Line Interface - security radius summary
http://support.3com.com/infodeli/tools/switches/4400/DHA1720-3AAA08/htmcli/securityradiussummary.htm[11/15/2010 3:47:16 PM]
Command Line Interface
security radius summary
Displaying the RADIUS Configuration Settings of the Switch
You can display a summary of the RADIUS configuration settings of the Switch using the
summary command on the radius menu.
To display the RADIUS settings for the Switch:
From the Top-level menu, enter:
security radius summary
The current RADIUS configuration settings for the Switch, including the device
authentication mode will be displayed as shown in the example below.
Primary RADIUS authentication server IP address: 123.45.678.1
Primary RADIUS authentication server UDP port number: 1812
Secondary RADIUS authentication server IP address: 123.45.678.2
Secondary RADIUS authentication server UDP port number: 1812
Primary RADIUS accounting server IP address: 123.45.678.3
Primary RADIUS accounting server UDP port number: 1813
Secondary RADIUS accounting server IP address: 123.45.678.4
Secondary RADIUS accounting server UDP port number: 1813
Action on accounting failure: reject
Maximum attempts: 4
Timeout (seconds): 2
Poll time (seconds): 170
Status of RADIUS authentication servers notConfigured
Status of RADIUS accounting servers notConfigured
Related Commands
logins Displaying Authentication Login Attempts
statistics Displaying Authentication Statistics
summary Displaying Authentication Summary Information
systemMode Modifying Authentication Mode
setup Using the RADIUS Configuration Wizard
accounting display Displaying RADIUS Accounting Statistics
accounting modify Modifying RADIUS Accounting Configuration
authentication display Displaying RADIUS Authentication Statistics
authentication modify Modifying RADIUS Authentication Configuration
retries Modifying RADIUS Retry Parameters
sharedSecret Modifying RADIUS Security Key