Version 6 SuperStack 3 Switch 4400 Management Interface Reference Guide

Table Of Contents
Web Management Interface - Security Radius Authentication Modify
http://support.3com.com/infodeli/tools/switches/4400/DHA1720-3AAA08/htmweb/radiusauthenticationmodify.htm[11/15/2010 3:47:30 PM]
Web Interface
Security RADIUS Authentication Modify
Modifying the RADIUS Authentication Configuration
You can modify the RADIUS authentication configuration for the Switch using the Modify
window.
To access the window:
1. Click Device View on the Toolbar.
2. Select Security -> Radius -> Authentication -> Modify in the Navigation Tree.
The Modify window is displayed.
3. Enter the IP address of the RADIUS servers that you wish to be the Primary and
Secondary Authentication Servers.
4. Enter the UDP port number of the RADIUS servers that you wish to be the Primary
and Secondary Authentication Servers.
5. Click OK. The authentication server information is changed to that specified, and
the Modify window closes.
Related Operations
Logins Displaying Authentication Login Attempts
Statistics Displaying Authentication Statistics
Summary Displaying Authentication Summary Information
System Mode Modifying Authentication Mode
Authentication Display Displaying RADIUS Authentication Statistics
Retries Modifying the RADIUS Retry Parameters
Shared Secret Modifying RADIUS Security Key
Summary Displaying RADIUS Summary Information