Version 6 SuperStack 3 Switch 4400 Management Interface Reference Guide

Table Of Contents
Command Line Interface - physicalInterface ethernet detail
http://support.3com.com/infodeli/tools/switches/4400/DHA1720-3AAA08/htmcli/physicalinterfaceethernetdetail.htm[11/15/2010 3:47:44 PM]
Differences
When the Differences statistics option is selected a copy of the etherstats is made
and stored. After each 10 second refresh period the latest etherstat values are
read. Therefore the displayed values on the Differences statistics are the latest
values minus the stored values.
Rates/Sec
The Rates/Sec statistics show two values. The Current figure is the counter rate
averaged over the latest refresh period. The Peak figure is the maximum rate that
the counters have reached since the Statistics window has been open.
Utilizations
The Utilization statistics show network traffic distributions (as percentages of
available bandwidth) for the Switch.
Related Commands
autoMDIX Enabling and Disabling auto MDIX on a port
flowControl Enabling and Disabling Flow Control
portCapabilities Setting the Port Capabilities
portMode Specifying the Speed and Duplex Mode
portState Enabling and Disabling Ports
smartAutosense Enabling/Disabling Smart Autosensing
summary Displaying Port Summary Information