Version 6 SuperStack 3 Switch 4400 Management Interface Reference Guide

Table Of Contents
Command Line Interface - physicalInterface ethernet portState
http://support.3com.com/infodeli/tools/switches/4400/DHA1720-3AAA08/htmcli/physicalinterfaceethernetportstate.htm[11/15/2010 3:47:54 PM]
Command Line Interface
physicalInterface ethernet portState
Enabling and Disabling Ports
You can enable and disable Ethernet ports on the Switch using the portState command
on the Ethernet menu.
By default, all ports on the Switch are enabled.
To enable or disable a port:
1. At the Top-level menu, enter:
physicalInterface ethernet portState
The following prompt is displayed:
Select Ethernet port (unit:port...,?):
2. Enter the number of the unit and port to be enabled or disabled.
The following prompt is displayed:
Enter new value (enable,disable) [enable]:
3. Enter enable or disable.
Related Commands
autoMDIX Enabling and Disabling auto MDIX on a port
detail Displaying Detailed Information
flowControl Enabling and Disabling Flow Control
portCapabilities Setting the Port Capabilities
portMode Specifying the Speed and Duplex Mode
smartAutosense Enabling/Disabling Smart Autosensing
summary Displaying Port Summary Information