Version 6 SuperStack 3 Switch 4400 Management Interface Reference Guide

Introduction - Using the Web Management Interface - The Summary View
http://support.3com.com/infodeli/tools/switches/4400/DHA1720-3AAA08/htm/introduction/web/summaryview.htm[11/15/2010 3:43:28 PM]
Introduction
Using the Web Interface
The Summary View
Click the Summary button on the
Toolbar to access the Summary View.
Click the System icon in the
Navigation Tree to update the Information Area with the
latest summary information for the Stack and the units within it.
The summary information is displayed in a series of tables:
System Summary
The first table is entitled System Summary and displays information for the Stack.
It displays the System Name, Location, Contact and Up Time.
Information may also be displayed when appropriate for the following Configuration
Backup and Restore operations:
Configuration Restore Failure
Configuration Save Failure
Saving Configuration
Restoring Configuration
Save Recommended
Device Summary
Subsequent tables are entitled Device Summary: Unit X, where X is the Unit
number. They display information for each manageable unit in the Stack. They
show the Unit Name, Type, Software Version, Hardware Version and IP Address for
each unit.
The Summary View only displays information for the Stack. You cannot perform any
operations from this view. You must use the
Device View to perform operations.
Related Sections
Accessing the Web Interface
Exiting the Web Interface
Understanding The Web Interface
The Banner
The Toolbar
The Navigation Tree
The Information Area
The Device View
The Help View
The Getting Started Pages