Version 6 SuperStack 3 Switch 4400 Management Interface Reference Guide

Introduction - Using the Web Management Interface - The Device View
http://support.3com.com/infodeli/tools/switches/4400/DHA1720-3AAA08/htm/introduction/web/deviceview.htm[11/15/2010 3:43:32 PM]
device mimic called "hotspots":
Port Hotspots
Each port on the mimic is a "hotspot". Click a port to open a pop-up menu that
contains operations which you can launch for that particular port.
The operations are:
Setup
Statistics
Port Security
Console Port Hotspot
The port labelled Console is a "hotspot". Click anywhere on this area to open a
pop-up menu that contains operations which you can launch for the console port:
Setup
Unit Hotspot
The non-port area of the mimic is a "hotspot". Click anywhere on this area to open
a pop-up menu that contains operations which you can launch for the unit as a
whole.
The operations are:
Name
Notepad
History-1 Hour
History-48 Hours
Port Setup Summary
Setup
The device mimic also has four Controls, which are text areas that you can use to
control the mimic and its appearance and to provide help information:
Polling Interval - Click this to set the rate at which the device mimic is
refreshed.
Poll Now - Click this to refresh the mimic now.
Display Filter - Click this to control how the port status is displayed.
Color Key - Click this for an explanation of the symbols and colours on the
mimic's ports.
Device Summary
A series of tables entitled Device Summary: Unit X (where X is the Unit Number) display
information for each manageable unit in the Stack. They show the Name, Type, Software
Version, Hardware Version, IP Address, MAC Address, Boot Version, Product Number,
Software Number and Up Time for each unit.
Related Sections
Accessing the Web Interface
Exiting the Web Interface