Version 6 SuperStack 3 Switch 4400 Management Interface Reference Guide

Table Of Contents
Web Management Interface - System Getting Started
http://support.3com.com/infodeli/tools/switches/4400/DHA1720-3AAA08/htmweb/gettingstarted.htm[11/15/2010 3:43:38 PM]
The Switch has three automatic IP configuration methods that it tries in turn,
these are: DHCP, Auto-IP and BOOTP. For detailed information on how the
automatic IP configuration process works, please refer to the Implementation
Guide on the CD-ROM that accompanies your Switch or on the 3Com Web site..
Automatic is the default setting for IP configuration. If you select Automatic IP
configuration, no further prompts are displayed.
If you choose to manually configure the IP information, you are prompted to enter
the following:
IP Address
Allows you to enter a unique IP address for the Switch.
If you change the IP address of the Switch, you can no longer access the web
interface unless you enter the new IP address in the Location Address field of your
browser.
Subnet Mask
Allows you to enter a subnet mask for the Switch.
Default Gateway (router)
If your network contains one or more gateways, this field allows you to enter the
IP address of the default gateway.
5. If you select None, no further prompts are displayed.
6. A new password for the current user (enter the existing password if you want to
leave the password unchanged).