Version 6 SuperStack 3 Switch 4400 Management Interface Reference Guide

Table Of Contents
Web Management Interface - Physical Interface Ethernet Setup
http://support.3com.com/infodeli/tools/switches/4400/DHA1720-3AAA08/htmweb/ethernetsetup.htm[11/15/2010 3:44:24 PM]
Web Interface
Physical Interface Ethernet Setup
Configuring Ports
You can configure individual and multiple ports on the Switch using the Setup window.
To access the window:
1. Click Device View on the Toolbar.
2. Select Physical Interface -> Ethernet -> Setup in the Navigation Tree;
or
Click the relevant port on the Switch graphic and select Setup.
If you want to configure several ports at once, you must access the Setup
window through the Navigation Tree. Clicking a port on the Switch graphic will only
allow you to configure that particular port.
If you access the Setup window through the Navigation Tree, you are prompted to
enter the port numbers, port ranges and/or port labels that you wish to configure.
You must separate the values that you enter with commas.
3. The
Setup window is displayed.
The Setup page contains the following elements:
Port(s):
Displays the number or label of the selected port(s).
Media Type