Version 6 SuperStack 3 Switch 4400 Management Interface Reference Guide

Command Line Interface - security device user modify
http://support.3com.com/infodeli/tools/switches/4400/DHA1720-3AAA08/htmcli/securitydeviceusermodify.htm[11/15/2010 3:45:14 PM]
Command Line Interface
security device user modify
Modifying User Details
You can modify user details for the stack using the modify command on the User menu.
The user's access level cannot be modified — to change access levels you need to
remove the user and define a new one with the same name.
To modify user details for the stack:
1. From the Top-level menu, enter:
security device user modify
The following warning and prompt is displayed:
WARNING: Local user accounts are ignored when using RADIUS
authentication.
WARNING: To ensure passwords are not inadvertently disclosed, please
ensure that only a secure CLI session is used to set passwords. This
can be achieved by using an encrypted SSH connection or through the
console port.
Select the user name (admin,manager,monitor):
2. Enter the name of the user to be modified.
The following prompt is displayed:
Enter the password:
3. Enter a password for the user.
The following prompt is displayed:
Re-enter the password:
4. Enter the password for the user again.
The following prompt is displayed:
Enter the community string [<user>]:
5. Enter a community string for the user.
The following prompt is displayed:
Do you want to set SNMPv3 security? (yes,no)[yes]:
6. Enter yes to set SNMPv3 security or 'no' if you do not wish to enter set security.
The following prompt is displayed: