Version 6 SuperStack 3 Switch 4400 Management Interface Reference Guide

Table Of Contents
Command Line Interface - security device user modify
http://support.3com.com/infodeli/tools/switches/4400/DHA1720-3AAA08/htmcli/securitydeviceusermodify.htm[11/15/2010 3:45:14 PM]
Enter SNMPv3 authentication protocol (none,md5,sha)[md5]:
7. Enter the SNMPv3 authentication protocol you wish to use.
If you enter 'none' no further prompts will appear.
If you enter 'md5 or sha' the following prompt is displayed:
The following prompt is displayed:
Enter SNMPv3 authentication password:
8. Enter your SNMPv3 authentication password.
The following prompt is displayed:
Enter SNMPv3 privacy protocol (none,des)[none]:
If you do not enter a new SNMPv3 authentication password, the previous
password for this user will be used.
9. Enter the SNMPv3 privacy protocol you wish to use.
If you enter 'none' no further prompts will appear.
If you enter 'des' the following prompt is displayed:
Enter SNMPv3 privacy password:
10. Enter your SNMPv3 privacy password.
If you do not enter a new SNMPv3 privacy password, the previous password for
this user will be used.
Related Commands
create Defining a New User
delete Deleting User Details
pwdRecover Enabling/Disabling Password Recovery
summary Displaying User Details