Version 6 SuperStack 3 Switch 4400 Management Quick Reference Guide

10
bridge spanningTree stpPriority
Sets the bridge Spanning Tree priority parameter.
bridge spanningTree stpState
Enables or disables Spanning Tree on a bridge.
bridge spanningTree stpVersion
Selects the version of Spanning Tree to run on the bridge.
bridge summary
Displays bridge information for the unit.
bridge vlan create
Creates a VLAN.
bridge vlan delete
Deletes a VLAN.
bridge vlan detail
Displays detailed information on a VLAN.
bridge vlan modify addPort
Adds a port to a VLAN.
bridge vlan modify name
Names a VLAN.
bridge vlan modify removePort
Removes a port from a VLAN.
bridge vlan summary
Displays summary information on a VLAN.
feature cacheConfig addCache
Adds the IP address of a Webcache to the network.
feature cacheConfig changePort
Change which TCP port is redirected.
feature cacheConfig disableCache
Disables redirection to a Webcache on the network.
feature cacheConfig enableCache
Enables redirection to a Webcache on the network.
feature cacheConfig removeCache
Removes the IP address of a Webcache from the network.
feature cacheConfig summary
Displays summary information for the redirection feature.
feature rovingAnalysis add
Configures the roving analysis port.
feature rovingAnalysis remove
Clears the roving analysis port.
feature rovingAnalysis start
Starts monitoring the roving analysis port.
feature rovingAnalysis stop
Stops monitoring the roving analysis port.
feature rovingAnalysis summary
Displays summary information on the roving analysis port.
gettingStarted
Guides you through the initial configuration of the stack.
logout
Logs out of the Command Line Interface.
physicalInterface ethernet autoMDIX
Enables or disables auto MDIX on a port.
physicalInterface ethernet detail
Displays detailed information on an Ethernet port.
physicalInterface ethernet flowControl
Enables or disables flow control.
physicalInterface ethernet portCapabilities
Sets the port capabilities.
physicalInterface ethernet portMode
Sets the port speed and duplex mode.
physicalInterface ethernet portState
Enables or disables an Ethernet port.
physicalInterface ethernet smartAutosense
Enables or disables smart autosensing.
physicalInterface ethernet summary
Displays summary information on an Ethernet port.
physicalInterface power configure †
Configures Power over Ethernet on a port by port basis.
physicalInterface power detail †
Displays Power over Ethernet details for one port.
physicalInterface power profile summary †
Displays power requirements for 3Com Power over Ethernet
products.
physicalInterface power state †
Enables or disables Power over Ethernet on a port by port
basis.
physicalInterface power summary †
Displays a summary of Power over Ethernet on a port by port
basis.
Command (Continued) What does the Command do?