HP 7500/7900 Switch Series - HP 7500-CMW520-R6703 Release Notes

Patches will be installed. Continue? [Y/N]:y

Do you want to continue running patches after reboot? [Y/N]:y

Installing patches........

Installation completed, and patches will continue to run after reboot.

NOTE:

 A patch file must have a valid name. Otherwise, the system cannot identify and install it. Table 8 shows

the default names of patch files.

 For more information about patch installation, see

Fundamentals

in the

HP 7500 Switch Series

Configuration Guides

Upgrade from the boot menu

You can upgrade the Boot ROM program and system software image for the MPUs from the boot menu.

 Upgrading Boot ROM from the boot menu

 Upgrading system software from the boot menu

CAUTION:

You cannot simultaneously upgrade the active and standby MPUs from the boot menu. To ensure that the

active and standby MPUs use the same software version, upgrade them in turn.

Boot menu

Connect a configuration terminal such as a PC to the console port of the switch with a console cable, run

the terminal emulation program on the PC, and power on the switch.

Upon power-on, the switch runs the Boot ROM program first and displays the following information:

Starting......

RAMLine.....OK

System is booting................

****************************************************************

* *

* BOOTROM, Version 3.01 *

* *

********************************************* *******************

Creation Date : Aug 9 2010

CPU Type : BCM1125H

CPU L1 Cache : 32KB

CPU Clock Speed : 600MHz

Memory Type : DDR SDRAM

Memory Size : 512MB

Memory Speed : 133MHz

BootRom Size : 512KB

Flash Size : 64MB

CPLD Version : 006

PCB Version : Ver.B