HP 7500/7900 Switch Series - HP 7500-CMW520-R6703 Release Notes

35
3: Display all files in device
4: Delete file from device
5: Modify bootrom password
0: Reboot
Enter your choice(0-5):0
Step9 Type 0 to reboot the switch.
NOTE:
The new Boot ROM version takes effect after the reboot.
Using FTP through the management Ethernet port
Step1 Connect the management Ethernet port of the switch to the PC that stores the target .app file (the IP
address of the PC is required), and connect the console port of the switch to the same or another PC.
Step2 Run the FTP server program on the PC connected to the management Ethernet port, specify the file
storage directory, and set the username and password.
Step3 Run the terminal emulation program on the PC connected to the console port. Start the switch, enter the
boot menu (see Boot menu for more information), and press Ctrl+U when you see "Enter your
choice(0-5):" to enter the Boot ROM update menu.
BootRom update menu:
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
4. Update through file in device
0. Return to boot menu
Enter your choice(0-4):
Step4 In the Boot ROM update menu, type 2 to set the FTP parameters:
BootRom update menu:
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
4. Update through file in device
0. Return to boot menu
Enter your choice(0-4):2
Load File name :newboot.btw The name of the target .btw file
Switch IP address :10.10.10.2 The IP address of the sw itch
Server IP address :10.10.10.3 The IP address of the PC that stores the .btw file
FTP User Name :username The FTP username
FTP User Password :12345 The passw ord
NOTE:
The switch must be on the same network segment as the PC storing the upgrade files.