HP 7500/7900 Switch Series - HP 7500-CMW520-R6703 Release Notes

36
Step5 After you set the FTP parameters and press Enter, the switch starts to download the upgrade file. When
the file is successfully downloaded, the following information appears:
Loading...........done!
Will you Update Basic BootRom? (Y/N):
Step6 Answer Y to the question. The following information appears:
Will you Update Basic BootRom? (Y/N): Y
Updating Basic BootRom..........done!
Updating extended BootRom? (Y/N):
Step7 Answer Y to the question. The following information appears:
Updating extended BootRom? (Y/N):Y
Updating extended BootRom...........done!
BootRom update menu:
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
4. Update through file in device
0. Return to boot menu
Enter your choice(0-4):
Step8 Type 0 to return to the boot menu.
BOOT MENU
1: Download application file to device
2: Select application file to boot
3: Display all files in device
4: Delete file from device
5: Modify bootrom password
0: Reboot
Enter your choice(0-5):0
Step9 Type 0 to reboot the switch.
NOTE:
The Boot ROM upgrade takes effect at the next startup.
Using Xmodem through the console port
Step1 Connect the console port of the switch to the PC that stores the upgrade files.
Step2 Run the terminal emulation program on the PC. Start the switch, enter the boot menu (see Boot menu for
more information), and press Ctrl+U when you see "Enter your choice(0-5):" to enter the Boot ROM
update menu.
BootRom update menu:
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
4. Update through file in device