HP 7500/7900 Switch Series - HP 7500-CMW520-R6703 Release Notes

0. Return to boot menu

Enter your choice(0-4):

Step3 In the Boot ROM update menu, type 3 to set the Xmodem parameters:

BootRom update menu:

1. Set TFTP protocol parameters

2. Set FTP protocol parameters

3. Set XMODEM protocol parameters

4. Update through file in device

0. Return to boot menu

Enter your choice(0-4):3

Please select your download baudrate:

1.*9600

2. 19200

3. 38400

4. 57600

5. 115200

0. Exit

Enter your choice (0-5):2

Step4 Select an appropriate download baud rate. For example, type 2 to select 19200 bps. The following

information appears:

Please change the terminal's baudrate to 19200 bps and select XMODEM protocol.

Press ENTER key when ready.

NOTE:

If you want to use the baud rate of 9600 bps, select it and directly go to Step 7. In this case, the system

does not display the above information.

Step5 Disconnect HyperTerminal from the switch by clicking Disconnect in the HyperTerminal window.

Step6 Select File > Properties in the HyperTerminal window, click Configure in the popup dialog box, and

select the baud rate of 19200 bps in the console port properties dialog box.