HP 7500/7900 Switch Series - HP 7500-CMW520-R6703 Release Notes

Step7 Answer Y to the question. The following information appears:

Updating Basic BootRom..........done!

Updating extended BootRom? (Y/N):

Step8 Answer Y to the question. The following information appears:

Updating extended BootRom...........done!

BootRom update menu:

1. Set TFTP protocol parameters

2. Set FTP protocol parameters

3. Set XMODEM protocol parameters

4. Update through file in device

0. Return to boot menu

Enter your choice(0-4):0

Step9 Type 0 to return to the boot menu.

BOOT MENU

1: Download application file to device

2: Select application file to boot

3: Display all files in device

4: Delete file from device

5: Modify bootrom password

0: Reboot

Enter your choice(0-5):0

Step10 Type 0 to reboot the switch.

NOTE:

The Boot ROM upgrade takes effect at the reboot.

Upgrading system software from the boot menu

Download new system software images

Download new system software images to your switch by using one of the following methods:

 Using TFTP through the management Ethernet port

 Using FTP through the management Ethernet port

 Using Xmodem through the console port

NOTE:

Skip this section if the new system software image already exists on your switch.

1. Using TFTP through the management Ethernet port

Step1 Connect the management Ethernet port of the switch to the PC that stores the target .app file (the IP

address of the PC is required), and connect the console port of the switch to the same or another PC.

Step2 Run the TFTP server program on the PC connected to the management Ethernet port and specify the file

storage directory.