HP 7500/7900 Switch Series - HP 7500-CMW520-R6703 Release Notes

Step3 Run the terminal emulation program on the PC connected to the console port. Start the switch, enter the

boot menu (see Boot menu for more information), and type 1 when you see "Enter your choice(0-5):" to

enter the download protocol menu.

BOOT MENU

1. Download application file to device

2. Select application file to boot

3. Display all files in device

4. Delete file from device

5. Modify BootRom password

0. Reboot

Enter your choice(0-5):1

Step4 In the download protocol menu, type 1 to set the TFTP parameters.

1. Set TFTP protocol parameter

2. Set FTP protocol parameter

3. Set XMODEM protocol parameter

0. Return to boot menu

Enter your choice(0-3): 1

Load File name :newest.app The name of the target .app file

Switch IP address :10.10.10.2 The IP address of the sw itch

Server IP address :10.10.10.3 The IP address of the PC that stores the .app file

NOTE:

The switch must be on the same network segment as the PC storing the upgrade files.

Step5 Set the TFTP parameters and press Enter. The following information appears:

Are you sure to download file to flash? Yes or No (Y/N):Y

Step6 Answer Y to the question. The switch starts to download the file. When the download is complete, the

following appears:

Loading........................................ ................................

...............................................................................

.......................................................................done!

Free space: 37584896 bytes

Writing flash..................................................................

...............................................................................

..........................done!

The attribute of old.app is changed from main to none!

done!

1. Set TFTP protocol parameters

2. Set FTP protocol parameters

3. Set XMODEM protocol parameters

0. Return to boot menu

Enter your choice(0-3): 0