HP 7500/7900 Switch Series - HP 7500-CMW520-R6703 Release Notes

45
Free space: 37584896 bytes
Writing flash..................................................................
...............................................................................
..........................done!
The attribute of old.app is changed from main to none!
done!
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
0. Return to boot menu
Enter your choice(0-3):0
Step14 Type 0 to return to the boot menu.
After the .app file is successfully downloaded, set the file as the main or backup system software image.
For more information, see Set new main and backup system software images.
3. Using Xmodem through the console port
Step15 Connect the console port of the switch to the PC that stores the target .app file.
Step16 Run the terminal emulation program on the PC. Start the switch, enter the boot menu (see Boot menu for
more information), and type 1 when you see "Enter your choice(0-5):" to enter the download protocol
menu.
BOOT MENU
1. Download application file to device
2. Select application file to boot
3. Display all files in device
4. Delete file from device
5. Modify BootRom password
0. Reboot
Enter your choice(0-5):1
Step17 In the download protocol menu, type 3. The switch asks you to provide the name of the file you want to
download.
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
0. Return to boot menu
Enter your choice(0-3): 3
Load File name :update.app The name of the file to be dow nloaded
Step18 Type the file name and the download baud rate menu appears.
Please select your download baudrate:
1.*9600
2. 19200
3. 38400