HP 7500/E7900 Switches and Fabric Modules - 7500-CMW520-R6708 Release Notes

<Sysname> bootrom update file flash:/newboot.btw slot 0

This command will update bootrom file on the specified board(s),

Continue? [Y/N]:y

Now updating bootrom, please wait...

Start accessing bootflash chip...

Bootrom update succeeded in slot 0.

# Upgrade the Boot ROM for the standby MPU in slot 1.

<Sysname> bootrom update file slot1#flash:/newboot.btw slot 1

This command will update bootrom file on the specified board(s),

Continue? [Y/N]:y

Now updating bootrom, please wait...

Start accessing bootflash chip...

Bootrom update succeeded in slot 1.

# Upgrade the Boot ROM for the LPU in slot 3.

<Sysname> bootrom update file flash:/newboot.btw slot 3

This command will update bootrom file on the specified board(s),

Continue? [Y/N]:y

Now updating bootrom, please wait...

Board has finished loading file on Chassis 0 Slot 3.

Start accessing bootflash chip...

Bootrom update succeeded in slot 3.

# Upgrade the Boot ROM for the LPU in slot 4.

<Sysname> bootrom update file flash:/newboot.btw slot 4

This command will update bootrom file on the specified board(s),

Continue? [Y/N]:y

Now updating bootrom, please wait...

Board has finished loading file on Chassis 0 Slot 4.

Start accessing bootflash chip...

Bootrom update succeeded in slot 4.

# Reboot the switch to validate the upgrade.

<Sysname> reboot

Start to check configuration with next startup configuration file, please wait.

........DONE!

This command will reboot the device. Continue? [Y/N]:y

NOTE:

The Boot ROM image stored on the active MPU can be used to upgrade both the active MPU and LPUs,

while that stored on the standby MPU is used to upgrade the standby MPU only.

2. Upgrade system software

# Specify the file newest.app as the main system software image to be used at the next startup of the

active MPU.

<Sysname> boot-loader file flash:/newest.app slot 0 main

This command will set the boot file of the specified board. Continue? [Y/N]:y

The specified file will be used as the main boot file at the next reboot on slot 0!