HP 7500/E7900 Switches and Fabric Modules - 7500-CMW520-R6708 Release Notes

230 User logged in

# Set the file transfer mode to binary.

[ftp] binary

200 Type set to I.

# Download the .app file from the PC to the root directory of the storage medium on the active MPU of

the IRF fabric.

[ftp] get newest.app

227 Entering Passive Mode (10,10,110,1,17,97).

125 BINARY mode data connection already open, transfer starting for / newest.app.

226 Transfer complete.

FTP: 14323376 byte(s) received in 15.974 second(s), 896.00K byte(s)/sec.

[ftp] bye

221 Server closing.

3. Copy the file newest.app to the root directory of the storage medium on each standby MPU of the

IRF fabric.

 On the standby MPU in slot 1 of member device 1

<Sysname> copy newest.app chassis1#slot1#flash:/

Copy flash:/newest.app to chassis1#slot1#flash:/newest.app?[Y/N]:y

%Copy file flash:/newest.app to chassis1#slot1#flash:/newest.app...Done.

 On the standby MPU in slot 0 of member device 2

<Sysname> copy newest.app chassis2#slot0#flash:/

Copy flash:/newest.app to chassis2#slot0#flash:/newest.app?[Y/N]:y

%Copy file flash:/newest.app to chassis2#slot0#flash:/newest.app...Done.

 On the standby MPU in slot 1 of member device 2

<Sysname> copy newest.app chassis2#slot1#flash:/

Copy flash:/newest.app to chassis2#slot1#flash:/newest.app?[Y/N]:y

%Copy file flash:/newest.app to chassis2#slot1#flash:/newest.app...Done.

NOTE:

 You can configure the switch as the FTP server, FTP client, or TFTP client. The transfer processes slightly

vary. For more information about FTP and TFTP, see

Fundamentals Configuration Guide

in the

HP 7500

Switch Series Configuration Guides

 You can use the transfer procedure described in this section to transfer Boot ROM images, system

software images, and patch files for upgrade from the CLI.

Upgrade software from the CLI

NOTE:

Make sure that the upgrade files exist in the root directory of the storage medium of the active and standby

MPUs of the IRF fabric.

Perform the following tasks as needed:

 Upgrade Boot ROM

 Upgrade system software

 Install patches