HP 7500/E7900 Switches and Fabric Modules - 7500-CMW520-R6708 Release Notes
33
# Specify the file newest.app as the main system software image to be used at the next startup of the
standby MPUs of the IRF fabric.
On the standby MPU in slot 1 of member device 1
<Sysname> boot-loader file chassis1#slot1#flash:/newest.app chassis 1 slot 1 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis 1
slot 1!
On the standby MPU in slot 0 of member device 2
<Sysname> boot-loader file chassis2#slot0#flash:/newest.app chassis 2 slot 0 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis 2
slot 0!
On the standby MPU in slot 1 of member device 2
<Sysname> boot-loader file chassis2#slot1#flash:/newest.app chassis 2 slot 1 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis 2
slot 1!
# Reboot the IRF fabric to validate the upgrade.
<Sysname> reboot
Start to check configuration with next startup configuration file, please wait.
........DONE!
This command will reboot the device. Continue? [Y/N]:y
CAUTION:
To prevent configuration loss, save the latest configuration changes before you reboot the switch.
System software images must be saved in the root directory of the storage medium. You can copy or
move system software images to the root directory. For more information about the boot-loader
command, see
Fundamentals Command Reference
in the
HP 7500 Switch Series Command References
.
3. Install patches
# Download the patch files to the root directory of the storage medium of the active and standby MPUs,
and then install the patch files with the patch install command.
<Sysname> system-view
[Sysname] patch install flash:
Patches will be installed. Continue? [Y/N]:y
Do you want to continue running patches after reboot? [Y/N]:y
Installing patches........
Installation completed, and patches will continue to run after reboot.
NOTE:
A patch file must have a valid name. Otherwise, the system cannot identify and install it. Table 8 shows
the default names of patch files.
For more information about patch installation, see
Fundamentals
in the
HP 7500 Switch Series
Configuration Guides
.