HP 7500/E7900 Switches and Fabric Modules - 7500-CMW520-R6708 Release Notes

35
Load File name :newboot.btw The name of the target .btw file
Switch IP address :10.10.10.2 The IP address of the switch
Server IP address :10.10.10.3 The IP address of the PC that stores the .btw file
NOTE:
The switch must be on the same network segment as the PC storing the upgrade files.
Step5 After you set the TFTP parameters and press Enter, the switch starts to download the upgrade file. When
the file is successfully downloaded, the following output appears:
Loading...........done!
Will you Update Basic BootRom? (Y/N):
Step6 Answer Y to the question. The following information appears:
Will you Update Basic BootRom? (Y/N):Y
Updating Basic BootRom..........done!
Updating extended BootRom? (Y/N):
Step7 Answer Y to the question. The following information appears:
Updating extended BootRom? (Y/N):Y
Updating extended BootRom...........done!
BootRom update menu:
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
4. Update through file in device
0. Return to boot menu
Enter your choice(0-4):
Step8 Type 0 to return to the boot menu.
BOOT MENU
1: Download application file to device
2: Select application file to boot
3: Display all files in device
4: Delete file from device
5: Modify bootrom password
0: Reboot
Enter your choice(0-5):0
Step9 Type 0 to reboot the switch.
NOTE:
The new Boot ROM version takes effect after the reboot.
Using FTP through the management Ethernet port
Step1 Connect the management Ethernet port of the switch to the PC that stores the target .app file (the IP
address of the PC is required), and connect the console port of the switch to the same or another PC.