HP 7500/E7900 Switches and Fabric Modules - 7500-CMW520-R6708 Release Notes

55
Table 12 BASIC-ASSISTANT menu
Option
Task
1. RAM Test
Perform a RAM test.
2 .Reserved
Reserved option field.
0. Exit to Main Menu
Return to the BASIC-BOOTROM menu.
To perform a RAM test, press Ctrl + T within four seconds after the prompt message "Press Ctrl+T to start
memory test" appears.
Using the EXTEND-BOOTROM menu
To access the EXTEND-BOOTROM menu:
7. Reboot the device or run the primary or backup extended Boot ROM segment from the
BASIC-BOOTROM menu.
8. Press Ctrl + B within five seconds after the "Press Ctrl+B to enter Boot Menu..." prompt message
appears. If you fail to do this, the system starts decompressing the system software.
BootRom password: Not required. Please press Enter to continue.
9. Press Enter at the prompt for password.
The EXTEND-BOOTROM menu appears.
Password recovery capability is enabled.
BOOT MENU
1. Download application file to device
2. Select application file to boot
3. Display all files in device
4. Delete file from device
5. Restore to factory default configuration
0. Reboot
Ctrl+F: Format File System
Ctrl+P: Skip Super Password
Ctrl+J: Download application to SDRAM and Run
Ctrl+U: Access BootRom update menu
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Availability of some options in this menu depends on the password recovery capability state
(displayed on top of the EXTEND-BOOTROM menu). For more information about the password
recovery capability feature, see "Disabling password recovery capability."
Table 13 EXTEND-BOOTROM menu options
Option
Tasks
Reference
1.Download application file
to device
Download system software to the
switch.
Downloading system software to the
switch
2.Select application file to
boot
Select the system software to be
loaded during the next reboot.
N/A
3. Display all files in device
Display all files on the switch.
Displaying all files