ProCurve Switch xl Modules Installation Guide 2004-05

2
HP ProCurve Switch xl Modules
Descriptions
Contact your HP-authorized networking products reseller or your HP representative
for information on availability of other modules and mini-GBICs. You can also visit
the HP networking products web site http://www.hp.com/go/hpprocurve to get more
information.
HP ProCurve Switch
10/100/1000-T xl
Module (J4907A)
†††
14 twisted-pair ports with RJ-45
connectors for 10/100/1000 Mbps
(Gigabit) or 100 Mbps operation
over Category 5 or better 100-ohm
UTP or STP cable (category 5e
recommended for Gigabit) -- all
ports have the IEEE 802.3ab Auto
MDI/MDI-X feature, and 2 slots
for installing any of the supported
HP ProCurve mini-GBICs*.
* Supported mini-GBICs: The following HP ProCurve mini-GBICs are supported by the mini-GBIC xl Module (as
of this printing): • Gigabit-SX LC mini-GBIC (J4858A) • Gigabit-LX LC mini-GBIC (J4859A) • Gigabit-LH LC mini-
GBIC (J4860A)
†
This module requires switch software version E.07.01 or later to be installed in the switch.
††
This module requires switch software version E.08.20 or later to be installed in the switch.
†††
This module requires switch software version E.08.30 or later to be installed in the switch.
Module Description