Installation Guide for cl Modules 2006-03

11
Installing the Modules
Connecting Cables
Connecting the Fiber cable
1. Remove the dust covers
from the cable connectors on
the transceiver port.
2. Aligning the notches on
the cable connectors with
the slots of the transceiver
ports, press the cable
connector into the
transceiver port until it snaps
into place.
2
1
Note
To ensure proper transmit/receive connections, make sure the transmit from
one device is connected to the receive of the other device.
Connecting the Copper cable
1. Push the copper cable
connector into the copper
transceiver port.
Ensure the locking device
locks the cable connector
into place.