Installation and Reference Guide HP AdvanceStack 100Base-THub-12TX, Hub-12TXM, and Switch Modules 1997-06

HP Hub-12TX/Hub-12TXM Installation and Reference Guide
xii Contents
Chapter 3: Setting up Network Connections 3-1
Special Architecture Used for the Hub-12TX/Hub-12TXM 3-1
Isolation Architecture 3-1
Stacking Cable Management Channel 3-2
Hub ID Setting 3-2
Using Management Agents 3-3
SNMP Backup Agent 3-3
Backup Links Function 3-4
Security Features 3-4
Sample Network Configurations 3-5
Connecting Hubs to the Stack 3-5
Isolating Specific Hub Connections 3-6
Isolating Multiple Hubs 3-7
Extending the Network with Alternate Connections 3-8
Linking the Stack to a Management Station 3-9
Interconnecting Isolated Collision Domains 3-10
Connecting Remote Stacks 3-11
Connecting to the Extended Network 3-12
Chapter 4: Configuring the System 4-1
Making the Connections Required for System Configuration 4-1
Direct Connection 4-2
Network Connection 4-2
Local Network Telnet Connection 4-2
Local Network Connection 4-3
Remote Connection 4-3
Configuring the Hub-12TXM Site 4-3
Configuring the Remote Site 4-4
Remote Configuration Methods 4-4
Configuring Your System 4-5
Using the VT-100 Console Interface 4-7
System Configuration for the Hub-12TX 4-7
Configuring the Switch Port Module 4-9
System Configuration for the Hub-12TXM and Stack 4-10
Displaying System Information 4-11
System Configuration 4-12
Changing the Network Configuration 4-13