Installation and Reference Guide HP AdvanceStack 100Base-THub-12TX, Hub-12TXM, and Switch Modules 1997-06

HP Hub-12TX/Hub-12TXM Installation and Reference Guide
Configuring the System 4-17
Configuring IP Trap Receivers
When the hub experiences an unusual event, a message is
issued to all listed network managers. Networks compliant
with Internet Protocol (IP) can pass trap messages to IP Trap
Receivers as shown below:
HP J3233A AdvanceStack 100Base-T Hub-12TXM
IP Trap Receivers
------------------------
Back to Previous Menu
IP Address Community Name Status
1. 0.0.0.0 public DISABLED
2. 0.0.0.0 public DISABLED
3. 0.0.0.0 public DISABLED
4. 0.0.0.0 public DISABLED
5. 0.0.0.0 public DISABLED
6. 0.0.0.0 public DISABLED
7. 0.0.0.0 public DISABLED
8. 0.0.0.0 public DISABLED
9. 0.0.0.0 public DISABLED
10. 0.0.0.0 public DISABLED
Back to previous menu.
<Enter> to confirm, <Ctrl+Z> to back to Main Menu
Figure 4.9 IP Trap Receivers Menu
Menu items are briefly described in the following table.
Field Description
IP Address IP address of the trap receiver. (Use dotted decimal notation.)
Community Name The community string required for trap access.
Status The current entry can be ENABLED or DISABLED.
Table 4.9 IP Trap Receivers Menu