Installation and Reference Guide HP AdvanceStack 100Base-THub-12TX, Hub-12TXM, and Switch Modules 1997-06

HP Hub-12TX/Hub-12TXM Installation and Reference Guide
Configuring the System 4-27
Menu items are briefly described in the following table.
Field Description
Set Identifier for up to 10 backup port pairs.
Primary Port Pair member serving as the primary link.
Hub Hub ID for the master port.
Port Port identifier for the master port.
Backup Port Pair member serving as the backup link.
Hub Hub ID for the backup port.
Port Port identifier for the backup port.
Port Backup Each backup pair can be set to Enabled or Disabled. Enabled: Upon failure of the primary link will be
utilized. Disabled: Upon failure of the primary link, the backup link will not be utilized.
Status PRIMARY is displayed if the primary port is currently linked.
BACKUP is displayed if the primary port is not currently linked.
Table 4.15 Backup Links Menu
System Statistics
From the Main menu select Statistics to access all information
on system performance. Statistics can be displayed for any hub
or port in the stack, or for the stack as a whole. An example
menu is shown below.
HP J3233A AdvanceStack 100Base-T Hub-12TXM
Statistics
---------------------------
Back to Previous Menu
Stack Statistics ...
Hub Statistics ...
Port Statistics ...
Back to previous menu.
<Enter> to confirm, <Ctrl+Z> to back to Main Menu
Figure 4.20 Statistics Menu