3Com® 5500G Open Services Networking Module getting started Guide

Hardware Configuration 13
/dev/hda2 /alt ext3 The root file system’s backup partition. Its
leave-factory setting is null.
/dev/hda3 swap swap The Linux system’s swapping partition.
When you boot from hard disk using
Elilo, it uses this partition as the system’s
swapping partition.
/dev/hda5 /opt ext The partition provided for the users. It is
the system’s largest partition. System,
files are not saved on this partition.
/dev/hda6 vboot vfat The Linux system’s boot partition. The
boot loader Elilo can identify the vfat
partition only. The Linux kernel and
ramdisk file are stored on this partition.
Table 6 Default partitioning of the OSN|M hard disk
Partition
name
Mount
point
Format of
file system Function