3Com® Switch 5500G Open Services Networking Configuration and Command reference Guide

16 Chapter 2: Configuring the Application Control Forwarding Protocol (ACFP)
Displaying ACFP
ACFP Configuration
Example
Network
Requirements
The internal networking of a company is as following:
■ Different departments are connected to the intranet through Switch
5500G units (ACFP server).
Enable ACFP acfp enable Required
Disabled by default
Enable ACFP traps snmp-agent trap enable acfp
[ client | policy | rule | server ]
Optional
Allowed by default
To... Use the command... Remarks
To... Use the command... Remarks
Display the configuration
information of the ACFP
server
display acfp server-info Available in any view
Display the configuration
information of an ACFP
client
display acfp client-info [
client-id ]
Display the configuration
information of an ACFP
policy
display acfp policy-info [
client client-id [
policy-index ] |
dest-interface
interface-type
interface-number |
in-interface
interface-type
interface-number ] [ active
| inactive ]
Display ACFP rule
configuration information
display acfp rule-info {
in-interface [
interface-type
interface-number ] | policy
[ client-id policy-index ] }
Display the configuration
information of ACFP Trap
display snmp-agent
trap-list