3Com® Switch 5500G Open Services Networking Configuration and Command reference Guide

Configuring an ACSEI Server on a Switch 23
6 If detecting the disconnection of the ACSEI client, the ACFP server will
remove the configuration and policies associated with the client.
Configuring an
ACSEI Server on a
Switch
The section covers these topics:
■ “Enabling an ACSEI Server” on page 23
■ “Configuring the Clock Synchronization Timer” on page 23
■ “Configuring the Monitoring Timer” on page 23
■ “Closing an ACSEI Client” on page 24
■ “Restarting an ACSEI Client” on page 24
■ “Displaying and Maintaining an ACSEI Server” on page 25
Enabling an ACSEI
Server
Follow these steps to enable ACSEI server:
Configuring the Clock
Synchronization
Timer
Follow these steps to configure the clock synchronization timer:
Configuring the
Monitoring Timer
Follow theses steps to configure the monitoring timer:
To... Use the command... Remarks
Enter system view system-view -
Enable ACSEI server acsei server enable Required
Disabled by default.
To... Use the command... Remarks
Enter system view system-view -
Enable the ACSEI server
function
acsei server enable Required
Enter ACSEI server view acsei server -
Configure the clock
synchronization timer from
ACSEI server to ACSEI
client
acsei timer clock-sync
minutes
Optional
Five minutes by default.
To... Use the command... Remarks
Enter system view system-view -
Enable the ACSEI server
function
acsei server enable Required