3Com® Switch 5500G Open Services Networking Configuration and Command reference Guide

24 Chapter 3: Configuring an Application Control System Exchange Interface
Closing an ACSEI
Client
Follow these steps to close an ACSEI client:
c
CAUTION: After you use the acsei client close command to close an
ACSEI client, the OSN|M with which the ACSEI client is integrated is shut
down.
Restarting an ACSEI
Client
Follow these steps to restart an ACSEI client:
c
CAUTION: After you use the acsei client reboot command to restart an
ACSEI client, the OSN|M with which the ACSEI client is integrated is
restarted.
Enter ACSEI server view acsei server -
Configure the monitoring
timer for ACSEI server to
monitor ACSEI client
acsei timer monitor
seconds
Optional
Five seconds by default.
To... Use the command... Remarks
To... Use the command... Remarks
Enter system view system-view -
Enable the ACSEI server
function
acsei server enable Required
Enter ACSEI server view acsei server -
Close the specified ACSEI
client
acsei client close client-id Required
To... Use the command... Remarks
Enter system view system-view -
Enable the ACSEI server
function
acsei server enable Required
Enter ACSEI server view acsei server -
Restart the specified ACSEI
client
acsei client reboot
client-id
Required