3Com® Switch 5500G Open Services Networking Configuration and Command reference Guide

5 ACFP Configuration
Commands
acfp enable
Syntax acfp enable
undo acfp enable
View System view
Parameters None
Description Use the acfp enable command to enable ACFP.
Use the undo acfp enable command to disable ACFP.
By default, ACFP is disabled.
Examples # Enable ACFP.
<SW5500G> system-view
System View: return to User View with Ctrl+Z.
[SW5500G] acfp enable
display acfp client-info
Syntax display acfp client-info [ client-id ]
View Any view
Parameters client-id: Displays information about the specified ACFP client, where
client-id is the ACFP client identifier, in the range of 1 to 2147483647.